Afp; Touch Gesture Recognition - AMX MVP-9000i Operation And Reference Manual

Programming
Slide, slide with bounce, door with fade and center door with fade can originate from the top, bottom, left and right sides
of the screen. Black glass can originate from the left or right. Fade does not need an origin since the entire screen fades
together. Page curl originates from the four corners of the screen: upper left, lower left, upper right and lower right.
The transition time is the amount of time required for the transition to operate from start to finish. This value can be
specified from 0.3 seconds to 3.0 seconds in tenths of a second. If not specified, the default is 1.5 seconds.
Transition times are based on real world clock time and do not vary based on the speed of the processor or the frame rate
at which the display system is running.
Since the transitions require OpenGL hardware acceleration, they are not seen by the user on a VNC connection. When a
transition is triggered, the user will see a normal page flip to the new page on the VNC connection, while the animated
transition occurs as expected on the panel.
Transition Commands

^AFP

Flips to a page
with the specified
page name using
an animated
transition.

Touch Gesture Recognition

Gesturing refers to the act of moving a finger or stylus across the overlay and having the panel recognize and process this
motion as a gesture.
Once a gesture is detected, it is processed as another external button on the panel. This enables the user to design pages
that translate gesture operations into any functionality available to external buttons. In addition, a gesture velocity is
calculated and transmitted to the master along with the gesture type itself in a custom event message. Nothing will be
processed if the external button associated with this gesture has no page flip operations programmed, is disabled, or has
no values programmed for address, channel, level, string output or command output. The custom event, however, is
always transmitted.
The following seven gesture types are supported:
1.
Swipe up
2.
Swipe down
3.
Swipe right
4.
Swipe left
104
Flips to a page with the specified page name using an animated transition. If the page is
active, do not redraw the current page. If the page name is blank, flips to the previous
page.
Syntax: "'^AFP-<page name>,<animation>,<origin>,<time>'"
Animation is one of the following strings: slide, sldBounce, blkGlass, fade, pgCurl,
doorFade, cntrDrFade
If animation is blank or invalid, the page flip will occur without any animated transition
occurring.
Origin is a number representing one of the following values for where
the animated transition originates on the screen:
1 - center (currently unused)
2 - top
3 - bottom
4 - left
5 - right
6 - lower left
7 - lower right
8 - upper left
9 - upper right
If the origin is blank or invalid, the default is 5 (right).
Time is the transition time in tenths of a second which can vary from 3 (0.3 seconds) to 30
(3.0 seconds). Values above or below these values will be clamped. If the time is blank,
then the default is 1.5 seconds.
Example:
"'^AFP-MAIN,slide,5,10'"
Will transition to a page named MAIN using a slide effect from the right to the left and
taking 1 second to complete.
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom