Display Page - AMX MVP-9000i Operation And Reference Manual

Display Page

The Display page controls the basic functions of the touch panel display, including the panel brightness.
FIG. 51 Display page
The features on this page include:
Display Page
Back icon:
WiFi/Wired icon:
Connection Status icon: The icon in the upper-right corner of each Setup page provides a constant visual
Panel Brightness:
Inactivity Page:
Flyout Menu:
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
The icon in the upper-left corner of each Setup page allows the user to return to
the previously selected page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired (image of
three networked computers).
indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Sets the display brightness and contrast levels of the panel.
• Press the Brightness Up/Down buttons to adjust the brightness level.
Range = 0 - 100.
Note: Be careful not to turn down the brightness too low to be able to see the
Setup page.
Indicates the length of time that the panel can remain idle before automatically
flipping to a pre-selected page.
• Press the Up/Down buttons to increase/decrease the Inactivity Page Flip
Timeout setting. Range = 1, 2, 5, 10, 15, 30 minutes, 1, 2, 3, 4 hours.
• Set the timeout value to 0 to disable Inactivity Page mode.
Note: The touch panel page used for the Inactivity page flip is named within a
small Inactivity Page field below the buttons. The default reading is "MAIN".
This switch controls the flyout menus on the capacitive touch buttons on the left of
the screen. "On" allows use of any flyout menus connected to the buttons, and
"OFF" disables them.
Setup Pages
45