AMX MVP-9000i Operation And Reference Manual page 108

Upgrading Firmware
4.
If the panel boots up and detects a KIT file in the "MVP-9000i" directory on the microSD card or USB stick, the
panel will request that you press the screen to upgrade or wait to continue booting (FIG. 101). Touch the screen to
start the firmware update process.
FIG. 101 "Firmware upgrade file detected" notice screen
5.
If you do not touch the screen to initiate a firmware update within 5 seconds, the touch panel will continue to reboot
(FIG. 102).
FIG. 102 "Firmware upgrade not initiated" notice screen
6.
If you touched the screen to upgrade firmware, the Upgrade In Progress splash screen will appear (FIG. 103).
FIG. 103 "Upgrade in Progress" splash screen
7.
If the panel does not detect the KIT file in the directory, access the Setup Pages (page 43), go to the Protected
Settings page (page 59), and access the System & Panel Options page (page 60). If the panel detects the appropriate
KIT file, either or both of the Install Firmware or Install Pages buttons will be enabled. Press either to go through
the automatic upload procedure.
94 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom