Wav Files - Supported Sample Rates; Power Management Page - AMX MVP-9000i Operation And Reference Manual

WAV files - Supported Sample Rates

The following sample rates for WAV files are supported by MVP-9000i panels:
Supported WAV Sample Rates
• 48000 Hz
• 44100 Hz
• 32000 Hz
• 24000 Hz
• 22050 Hz

Power Management Page

The options on the Power Management page allow setting of power warning preferences and battery status information,
and adjustment of the display times for battery warnings (FIG. 53)
FIG. 53 Power Management page
Features on this page include:
Power Management Page
Back:
WiFi/Wired icon:
Connection Status icon:
Power Settings:
Sleep:
Standby:
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
• 16000 Hz
• 12000 Hz
• 11025 Hz
• 8000 Hz
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
The three settings in the Power Settings section may be selected by touching
either the arrow to the left of each setting or by touching the entry itself. Each is
highlighted with a green arrow to the left when selected.
This value determines the number of seconds or minutes that need to pass
before the panel automatically goes into Sleep Mode. Once asleep, the device
may be awakened by touching the buttons on either side of the screen or the
screen itself. Use the Up/Down arrows to change the settings; the
setting bar will change from blue to green to display the percentage of minimum
versus maximum.
Range = 10, 15, 20, 25, 30 seconds; 5, 15, 30 minutes; 1, 2 hours Default = 2
hours
This value determines the number of seconds or minutes that need to pass
before the panel automatically goes into Standby Mode. Once in standby, the
device may be awakened by touching the screen. Use the Up/Down arrows to
change the settings; the setting bar will change from blue to yellow to display
the percentage of minimum versus maximum. A value of Off disables this
feature.
Range = 15, 30 minutes; 1, 2, 3, 4 hours Default = Off
Setup Pages
47