AMX MVP-9000i Operation And Reference Manual page 48

Configuring Communication
FIG. 32 Found New Hardware Wizard dialog
4.
Select Yes, this time only and click on Next.
5.
In the new window:




6.
In the next box (FIG. 33), make sure to:




FIG. 33 Found New Hardware Wizard Installation Options dialog
7.
Click on Next.
8.
The Windows XP machine now searches for the suitable driver (FIG. 34).
FIG. 34 Found New Hardware Wizard while searching for the driver
9.
Once the system finds the driver, it displays its choice (FIG. 35). Click Finish to complete the driver installation.
34
- Select Use the following IP Address.
Under IP address, provide an IP address. The USB interface IP address of the panel can be found in the
System Settings page under the USB tab. The default USB IP of panel is 172.16.0.2, so the IP address for the
USB interface on the PC must be 172.16.0.xx. Ensure that it is in the same subnet as the IP address given to
the usb0 interface on the MVP-9000i, but make sure that it has a different node number. The IP address
cannot be the same as the panel`s USB IP address.
Under Subnet mask, set the suitable subnet mask. Make sure that the host machine has the same subnet mask.
(The subnet mask for USB connection is 255.255.0.0, which is not user-configurable.)
Click OK.
Select Search for the best driver in these locations
Select Include this location in the search
Click on Browse
Select the folder that contains the 'linux.inf' file
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom