AMX MVP-9000i Operation And Reference Manual page 16

Introduction
The MVP-9000i comes with an integrated rear "kickstand", allowing it to be used and displayed away from a Docking
Station (FIG. 2). It also comes with a pre-installed 802.11a/b/g wireless card.
Capacitive touch
buttons (4)
MicroSD memory
card slot
Mini-USB port
DC power jack
FIG. 2
MVP-9000i side view (with kickstand)
MVP-9000i Specifications
Models Available:
Dimensions (HWD):
Weight:
Enclosure:
Memory:
Power Requirements
(Without Charging):
Power Requirements
(While Charging):
Minimum Power Supply
Required:
Power Modes:
Battery Duration:
2
Stylus
Kickstand
• MVP-9000i-GB (Black - FG5967-01)
• MVP-9000i-GW (White - FG5967-02)
• 7.62" x 10.98" x 1.06" (19.35 cm x 27.89 cm x 2.69 cm)
• 3.60 lbs (1.63 kg)
MVP-9000i-GB: Black plastic with brushed metal retaining ring.
MVP-9000i-GW: White plastic with brushed metal retaining ring.
• 4GB internal microSD (3.1GB accessible to user)
• Constant current draw: 1.1 A @ 12 VDC
• Startup current draw: 1.2 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures.
NOTE: Please see the Power Management section on page 164 for additional
information.
Panel while charging battery:
• Constant current draw: 2.0 A @ 12VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures.
• PS3.0 Power Supply (FG423-30) (included)
• PS-POE-AT High Power PoE Injector (FG423-81) through the Table Docking
Station and Wall Docking Station
• ON: All necessary modules are powered up and device remains online with
the NetLinx Master.
• SLEEP: Only the backlight will be turned off after the user selectable time of
inactivity has elapsed. Panel resumes the ON mode immediately after being
touched.
• STANDBY: Power to all components other than the touch screen is turned
off after the user selectable time of inactivity has elapsed. Device will turn
back on by touching the screen. Re-acquiring an AP connection may require
up to 25 seconds. (Standby Mode does not apply if a USB or microSD card
is connected to the device. For more information, please refer to the Picture
View section on page 7.)
• SHUTDOWN: Power to all peripherals and components is turned off. The
system remains in this mode until it is restarted by applying power or
touching the screen.
• On (continuous use): 5 hours; Standby: 3 days
• 10 hours of normal use, in a combination of On, Sleep, Standby, and
Shutdown.
• 3 days of standby use
Capacitive touch
directional pad
Speaker
Docking Station
interface connector
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom