Mvp-9000I 9" Modero® Viewpoint® Touch Panel With Intercom - AMX MVP-9000i Operation And Reference Manual

MVP-9000i Specifications (Cont.)
Panel LCD Parameters:
External Components
Stylus Slot:
MicroSD Card Slot:
Mini-USB Connector:
DC power port:
Microphone:
Speaker:
Audio Standards:
IR Emitters:
Certifications:
Operating/Storage
Environment
Included Accessories:
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
• Screen resolution: 800 x 480 pixels (HV) @ 60 Hz refresh rate
• Aspect ratio: 16 x 9
• Brightness (luminance): 400 cd/m2
• Channel transparency: 8-bit Alpha blending
• Contrast ratio: 900:1 max.
• Display colors: 16.7M colors (24-bit color depth)
• Dot/pixel pitch: 0.246 mm
• Panel type: TFT Color Active-Matrix (IPS technology)
• Viewing angles:
Vertical: + 85° (up from center) and - 85° (down from center)
Horizontal: + 85° (left from center) and - 85° (right from center)
Slot where the included stylus is stored, located on the left side of the device.
Slot for insertion of standard MicroSD memory cards.
5-pin Mini-USB connector used for audio output to USB headphones,
programming, firmware updates, and touch panel file transfer between the PC
and the target panel.
Note: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On before attempting to connect the USB
cable from the PC to the mini-USB port on the panel.
2.5 mm port to power the panel away from a Docking Station.
For use with the intercom feature and for calls using SIP.
• Frequency: 20 to 160,000 Hz
• S/N Ratio: More than 58 dB
• 4 Ohm
• 2 Watts 300Hz cutoff frequency
• G.711 sound standard
• 75dB SPL@1m
Transmit IR (transmit only) over 20 feet (6.10 m) from the panel.
• IR emitters on G4 panels share the device address number of the panel.
• Transmits AMX fixed frequencies at 38KHz and 455KHz and third-party
user-programmable frequencies from 20KHz to 1.5MHz
• FCC Class B
• CE
• IC
• VCCI
• C-Tick
•
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Battery Charging Temperature: 0° C (32° F) to 30° C (86° F)
• Operating & Battery Charging Humidity: 20% to 85% RH
• Storage Temperature: -10° C (-14° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
• MVP-9000i Installation Guide (93-5967-01)
• PS3.0 Power Supply (FG423-30)
• Stylus (pre-installed onto the left side of the unit)
Introduction
3