Picture View - AMX MVP-9000i Operation And Reference Manual

Picture View

With Picture View, inserting a microSD memory card into the slot on the left side of the device, or connecting a USB
drive via the mini-USB port (FIG. 2), allows the MVP-9000i to access JPEG images on that card and display them on the
touchscreen (FIG. 3). Individual images may be accessed at any time, or the entire collection may be displayed for
predetermined times. Picture View may be stopped at any time by removing the memory card or USB drive, and the
MVP-9000i will return to its default display page.
FIG. 3 Picture View display
The maximum resolution of any image to be viewed in Picture View is 1280 x1024
pixels. Images larger than this should be reformatted before being added to a USB
stick or MicroSD card.
To start Picture View:
1.
Connect a USB drive to the device or insert a microSD memory card into the microSD memory card slot. Picture
View will automatically recognize all available images on the drive or memory card and start displaying them on
the touchscreen.
2.
When the images begin to display, touch any place on the touchscreen to open the configuration popup menu
(FIG. 4). If no selection is made, this menu will remain in place for 15 seconds and then disappear. It may be
accessed again by touching anywhere on the touchscreen.
3.
On the leftmost red button, select between Rand (images display at random) and A-Z (images display in
alphabetical order based on the name of the file).
4.
The four blue buttons allow scrolling through saved images and the rate of display:

The Previous button returns the display to the previously displayed image.

The Stop button stops Page View and returns to the default panel page.

The Pause/Resume button allows the display to stop on one particular image. Press it again to resume the
display procession.

The Next button moves the display to the next stored image. If the MPVP-9000i has not accessed all of the
images available on a USB drive or memory card, Page View will display the last one uploaded to date.
5.
On the rightmost red button, select the number of seconds a selected image will be displayed in Picture View. This
may be selected between 5, 10, 15, 30, and 60 seconds.
6.
The counter beneath the buttons displays the number of images currently uploaded by the MVP-9000i versus the
number detected on the USB drive or microSD card.
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Picture View is disabled on the MVP-9000i by default, and must be enabled or
disabled with the ^PIC Send Command. For more information, please refer to the
^PIC section on page 132.
Introduction
7