AMX MVP-9000i Operation And Reference Manual page 89

EAP-FAST (Cont.)
Anonymous Identity:
Password:
Key Mgmt:
Automatic PAC
Provisioning:
PAC File Location:
Auto Key Renewal:
Cancel/Save:
Refer to the EAP Authentication section on page 178 and the Using the Wireless Site Survey Tool section on page 30 for
further details on these security options.
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Opens an on-screen keyboard to enter an IT provided alphanumeric string
which (similar to the username) is used as the identity, but that does not
represent a real user.
This information is used as a fictitious name which might be seen by sniffer
programs during the initial connection and setup process between the panel
and the Radius server. In this way the real identity (username) is protected.
Typically, this is in the form of a fictitious username, such as
anonymous@amx.com
Opens an on-screen keyboard. Enter the network password string specified
for the user entered within the Identity field (used by the panel to identify itself
to an Authentication (RADIUS) Server)
Note: This information is similar to the password entered to gain access to a
secured workstation.
This button has 4 options:
WPA-EAP: The default and most common setting for EAP authentication
methods. Accepts WPA, WPA2 & TKIP, or AES.
8021X: Used to specify IEEE 802.1x port authentication only.
CCKM-WPA: Cisco key management option. Used with CCKM and WPA
(TKIP encryption only) authentication.
CCKM-WPA2: Cisco key management option. Used with CCKM and WPA2
(AES encryption only) authentication.
NOTE: The Key Mgmt selection must match the security settings on the AP
in order for the connection to be successful.
This selection toggles PAC (Protected Access Credential) Provisioning -
Enabled (automatic) or Disabled (manual).
• If Enabled is selected, the following PAC File Location field is disabled,
because the search for the PAC file is done automatically.
• If Disabled is selected, the user is required to manually locate a file
containing the PAC shared secret credentials for use in authentication. In
this case, the IT department must create a PAC file and then transfer it into
the panel using the AMX Certificate Upload application.
Note: Even when automatic provisioning is enabled, the PAC certificate is
only downloaded the first time that the panel connects to the RADIUS server.
This file is then saved into the panel's file system and is then reused from
then on. It is possible for the user to change a setting, such as a new Identity,
that would invalidate this certificate. In that case, the panel must be forced to
download a new PAC file.
To do this, set Automatic PAC Provisioning to Disabled and then back to
Enabled. This forces the firmware to delete the old file and request a new
one.
This field is used when the previous Automatic PAC Provisioning option has
been Disabled.
• When pressed, the panel displays an on-screen PAC File Location
keyboard which allows you to enter the name of the file containing the PAC
shared secret credentials for use in authentication.
• This field is only valid when the automatic PAC provisioning feature has
been enabled via the previous field.
• Select between NEVER, 1 Day, 3 Days, 7 Days, 14 Days, and 30 Days.
• Cancel - discard changes and return to the previous page.
• Save - store the new security information, apply changes, and return to the
previous page.
Protected Setup Pages
75