Undocking From The Mvp-Tds-9 Or Mvp-Wds-9 - AMX MVP-9000i Operation And Reference Manual

Accessories

Undocking from the MVP-TDS-9 or MVP-WDS-9

Once placed within either the Table Docking Station or the Wall Docking Station, the MVP-9000i remains secured until
the user unlocks it. A ten-second lag between the touch panel being placed in either Docking Station and the security
feature enabling allows the user to remove the touch panel if it is accidentally put into the device. To release the touch
panel from either Docking Station:
1.
Press the Release button (see FIG. 7 for the Table Docking Station or FIG. 11 for the Wall Docking Station).
2.
A password keypad will pop up on the MVP-9000i screen. Enter a password in the password keypad and press
Enter.
Unique passwords may be entered for up to four unique users as well as the
administrator. For more information on setting passwords, please refer to the
Passwords section on page 84.
3.
If the MVP-9000i was conducting a SIP call or Dynamo session at this time, a confirmation dialog window appears
to warn that any open sessions or calls will end (FIG. 18). Click Yes to undock the panel and disconnect the call/
session, or No to keep the panel in the Docking Station and continue the call/session.
FIG. 18 Undocking confirmation dialog window
4.
When disconnecting from a Docking Station, the MVP-9000i will attempt to switch from a Wired to Wireless
connection. If the touch panel is unable to connect to a wireless network, a confirmation window appears warning
that the panel will lose its network connection (FIG. 19). Press Undock if you still wish to remove the touch panel,
or Cancel to keep the panel in the Docking Station. If you do not choose either option, the undocking attempt will
automatically cancel within 15 seconds.
FIG. 19 "Attempting to Undock" confirmation window
22 MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom