System Settings - Wired - AMX MVP-9000i Operation And Reference Manual

System Settings - Wired

Use the options on the Wired Tab (FIG. 73) to configure communication settings for Ethernet communication with the
MVP-9000i.
FIG. 73 System Settings - Wired Tab
Features on this page include:
System Settings - Wired Tab
Back:
WiFi/Wired icon:
Connection Status icon:
DHCP/STATIC:
IP Address:
Subnet Mask:
Gateway:
Host Name:
Primary DNS:
Secondary DNS:
Domain:
MAC Address
If the touch panel will not be used in a docking station, or if the docking station will not
have network connectivity (i.e., if the docking station is being used only to charge the
device), using the default DHCP setting for the wired interface is highly
recommended. Configuring a static IP address on the Wired Settings page without
network connectivity may lead to a loss of connection.
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired (image
of three networked computers).
The icon in the upper-right corner of each Protected Setup page provides a
constant visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Sets the panel to either DHCP or Static communication modes.
• DHCP - a temporary IP Addresses is assigned to the panel by a DHCP
server. If DHCP is selected, the other IP Settings fields are disabled (see
below).
• Static IP is a permanent IP Address assigned to the panel. If Static IP is
selected, the other IP Settings fields are enabled (see below).
This is the IP address for this panel.
This is the subnet mask for this panel.
This is the gateway address for this panel.
This is the host name for this panel.
This is the address of the primary DNS server used by this panel for host name
lookups.
This is the secondary DNS address for this panel.
This is a domain name to the panel for DNS look-up.
This unique address identifies the wireless Ethernet card in the panel (read-
only).
Protected Setup Pages
65