Determining The Current Panel Firmware Version; Determining The Current Panel Firmware Version (On The Panel); Determining The Current Panel Firmware Version (In Netlinx Studio) - AMX MVP-5200i Installation Manual

Battery replacement & firmware upgrade 5.2" modero viewpoint touch panels
Hide thumbs Also See for MVP-5200i:
Table of Contents

Advertisement

Determining the Current Panel Firmware Version

You can determine the current version of Firmware loaded on your Touch Panel either by checking the Panel
Information page on the panel itself, or by checking the Online Tree in NetLinx Studio, as described in the
following sections.

Determining the Current Panel Firmware Version (on the Panel)

The current version of Firmware loaded on your Touch Panel is indicated on the Panel Information page.
To access the Panel Information page:
1.
Press the center button of the navigation wheel and hold for 3 to 5 seconds to access the main Setup page.
2. Press and hold the Information navigation button until the Project Information button and the
Panel Information button slide from the left.
3.
Press Panel Information to access the Panel Information page. The current version of panel firmware is
indicated under Firmware Version in the left column (FIG. 1).
FIG. 1
Panel Information page

Determining the Current Panel Firmware Version (in NetLinx Studio)

Another way to determine the current version of Firmware loaded on your Touch Panel is to view the panel in
NetLinx Studio's Online Tree:
These steps assume that you are running NetLinx Studio, and are connected to the
LAN. Refer to the Connecting to a NetLinx Master Via TCP/IP section on page 3 for
instructions on connecting to the LAN if necessary.
1.
In NetLinx Studio, open the Online Tree tab of the Workspace Bar. The Online Tree displays an online
device tree for the NetLinx Master Controller. This tab displays a list of devices detected to be currently
online by the Master Controller (and the firmware version for each).
2.
Check that The panel is listed as a connected device under the NetLinx Master (FIG. 2).
Battery Replacement & Firmware Upgrade - 5.2" Modero ViewPoint Touch Panels
Upgrading Panel Firmware
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvp-5150Mvp-5100

Table of Contents