Table of Contents
Advertisement
Button Commands (Cont.)
^BMF
(Cont.)
Example:
^BMI
Set the button mask image. Mask image is used to crop a borderless button to a non-square shape. This is typically used with a
bitmap.
Syntax:
Variable:
Example:
Note: If the Border Style properties is set to something other than 'None', no visible change will occur. Setting the Border Style to
'None' via ^BOR or ^BMF..%B will reveal the Chameleon image.
Syntax:
Variables:
Example:
^BML
Set the maximum length of the text area button. If this value is set to zero (0), the text area has no max length. The maximum
length available is 2000. This is only for a Text area input button and not for a Text area input masking button.
Syntax:
Variable:
Example:
^BMP
Assign a picture to those buttons with a defined address range.
Syntax:
Variable:
Example:
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
'%VL<0-1>' = Log-On/Log-Off the computer control connection
'%VN<network name>' = Set network connection name.
'%VP<password>' = Set the network connection password.
SEND_COMMAND Panel,"'^BMF-500,1,%B10%CFRed%CB Blue %CTBlack%Ptest.png'"
Sets the button OFF state as well as the Border, Fill Color, Border Color, Text Color, and Bitmap.
"'^BMI-<vt addr range>,<button states range>,<mask image>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
mask image = Graphic file used.
SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
"'^BMI-<variable text address range>,<button states range>,<mask image>'"
Set the Chameleon Image button property. See Working With Chameleon Images in TPD4 Help.
SEND_COMMAND <DEV>,"'^BMI-<vt addr range>,<button states range>,<mask image>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
mask image = Chameleon used.
SEND_COMMAND Panel,"'^BMI-530,1&2,newMac.png'"
Sets the button with variable text 530 ON/OFF state mask image to 'newmac.png'.
"'^BML-<vt addr range>,<max length>'"
variable text address range = 1 - 4000.
max length = 2000 (0=no max length).
SEND_COMMAND Panel,"'^BML-500,20'"
Sets the maximum length of the text area input button to 20 characters.
"'^BMP-<vt addr range>,<button states range>,<name of bitmap/picture>'"
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
name of bitmap/picture = 1 - 50 ASCII characters.
SEND_COMMAND Panel,"'^BMP-500.504&510.515,1,bitmap.png'"
Sets the OFF state picture for the buttons with variable text ranges of 500-504 & 510-515.
Programming
95
Advertisement
Table of Contents
