Seat Removal - Honda TRX420FPM Owner's Manual

Seat Removal

Refer to Saf ety Precautions
The seat must be removed for the air cleaner, engine oil, engine oil filter,
clutch, spark plug, battery and fuse maintenance and to remove the side
covers, rear fender cover and left tank side cover, to access the owner's
manual, air pressure gauge, coolant reserve tank cap and colour label.
(4)
(1) seat latch
(2) seat
(3) front prongs
Removal
1. Pull the seat latch ( ) at the rear of the seat.
2. Slide the seat ( ) back and lift it.
Installation
1. Insert the front prongs ( ) into the hooks ( ) on the frame and press
the studs ( ) into the grommets ( ). 5
2. Press down on the seat until locks.
Servicing Your Honda
108
on page
(3) (5)
(6)
1
2
3
97 .
(2)
(4) hooks
(5) studs
(6) grommets
4
6
(1)