Lldp Dot3-Tlv Poe - Planet SGSD-1022 User Manual

Command Usage
Refer to "Frame Size Commands" on page 4-32 for information on configuring the maximum frame size for this switch.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv max-frame
Console(config-if)#

lldp dot3-tlv poe

This command configures an LLDP-enabled port to advertise its Power-over-Ethernet (PoE) capabilities. Use the no form to
disable this feature.
Syntax
[no] lldp dot3-tlv poe
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises Power-over-Ethernet capabilities, including whether or not PoE is supported, currently enabled, if
the port pins through which power is delivered can be controlled, the port pins selected to deliver power, and the power
class. Note that this device does not support PoE capabilities.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv poe
Console(config-if)#
lldp medtlv extpoe
This command configures an LLDP-MED-enabled port to advertise and accept Extended Power-over-Ethernet configuration
and usage information. Use the no form to disable this feature.
Syntax
[no] lldp medtlv extpoe
Default Setting
User's Manual of SGSD-1022 / SGSD-1022P
610
SGSW-2840 / SGSW-2840P