General Commands - Planet SGSD-1022 User Manual

Quality of Service
Multicast Filtering
IP Interface
The access mode shown in the following tables is indicated by these abbreviations:
ACL (Access Control List Configuration)
CM (Class Map Configuration)
GC (Global Configuration)
IC (Interface Configuration)
LC (Line Configuration)
MST (Multiple Spanning Tree)

5.4 General Commands

These commands are used to control the command access mode, configuration mode, and other basic functions.
Command
enable
disable
configure
show history
reload
prompt
end
exit
quit
help
?
enable
This command activates Privileged Exec mode. In privileged mode, additional commands are available, and certain commands
display additional information. See
Syntax
enable [level]
level - Privilege level to log into the device.
Configures Differentiated Services
Configures IGMP multicast filtering, query parameters, specifies ports attached to a
multicast router, and enables multicast VLAN registration
Configures IP address for the switch
Table 5-4 Command Groups
Function
Activates privileged mode
Returns to normal mode from privileged mode
Activates global configuration mode
Shows the command history buffer
Restarts the system
Customizes the prompt used in PE and NE mode
Returns to Privileged Exec mode
Returns to the previous configuration mode, or exits the CLI
Exits a CLI session
Shows how to use help
Shows options for command completion (context sensitive)
Table 4-5 General Commands
"Understanding Command
User's Manual of SGSD-1022 / SGSD-1022P
NE (Normal Exec)
PE (Privileged Exec)
PM (Policy Map Configuration)
SG (Server Group)
VC (VLAN Database Configuration)
Modes".
349
SGSW-2840 / SGSW-2840P
Mode
NE
PE
PE
NE, PE
PE
GC
any config. mode
any
NE, PE
any
any