4.7.1.10 LLDP PoE Neighbors
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure
Please note that administrator has to enable LLDP port from LLDP configuration, please refer to the following example (The
screen in Figure
4-6-1-10
appears.) To enable LLDP function from port1 to port3, administrator has to plug a PD that supports
PoE LLDP function, and then administrator is going to see the PoE information of the PD from LLDP.
User's Manual of GS-5220 PoE Series Managed Switch
Figure 4-7-1-9: LLDP PoE Neighbor Screenshot
Figure 4-7-1-10: LLDP Configuration Screenshot.
383
4-7-1-9
appears.