Planet SGSD-1022 User Manual page 27

- IP TCP/UDP port number
Supports for strict priority and Weighted Round Robin (WRR) CoS policies
Supports QoS and bandwidth control on each port
Traffic-policing policies on the switch port
Multicast
Supports IGMP Snooping v1 and v2
Querier mode support
Multicast VLAN Registration (MVR)
Security
IEEE 802.1x Port-Based / MAC-Based Authentication
Web Authentication
RADIUS / TACACS+ users access authentication
IP-Based Access Control List (ACL)
MAC-Based Access Control List (ACL)
Port Security
Management
Switch Management Interface
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH v1/v2 switch management
- SSL v3/TLS v1 switch management
IP Stacking management up to 36 units
Accesses through SNMPv1, v2c and v3 security set and get requests.
Four groups (history, statistics, alarms and events) of embedded remote monitoring (RMON) agents for network
monitoring and traffic analysis
Built-in Trivial File Transfer Protocol (TFTP) client
Power over Ethernet (SGSD-1022P / SGSW-2840P Only)
Complies with IEEE 802.3af Power over Ethernet End-Span PSE
Up to 8 / 24 IEEE 802.3af devices powered
Support PoE Power up to 15.4 watts for each PoE ports
Auto detect powered device (PD)
Circuit protection prevent power interference between ports
Remote power feeding up to 100m
PoE Management
Total PoE power budget control
Pert port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection
User's Manual of SGSD-1022 / SGSD-1022P
27
SGSW-2840 / SGSW-2840P