Secure Shell Commands - Planet SGSD-1022 User Manual

Console(config)#

5.12.8 Secure Shell Commands

This section describes the commands used to configure the SSH server. However, note that you also need to install a SSH
client on the management station when using this protocol to configure the switch.
The Managed Switch supports both SSH Version 1.5 and 2.0.
Command
ip ssh server
ip ssh timeout
ip ssh authentication-retries
ip ssh server-key size
copy tftp public-key
delete public-key
ip ssh crypto host-key generate
ip ssh crypto zeroize
ip ssh save host-key
disconnect
show ip ssh
show ssh
show public-key
show users
Configuration Guidelines
The SSH server on this Managed Switch supports both password and public key authentication. If password authentication is
specified by the SSH client, then the password can be authenticated either locally or via a RADIUS or TACACS+ remote
authentication server, as specified by the authentication login command. If public key authentication is specified by the client,
then you must configure authentication keys on both the client and the Managed Switch as described in the following section.
Note that regardless of whether you use public key or password authentication, you still have to generate authentication keys on
the Managed Switch and enable the SSH server.
Function
Enables the SSH server on the switch
Specifies the authentication timeout for the SSH server
Specifies the number of retries allowed by a client
Sets the SSH server key size
Copies the user's public key from a TFTP server to the switch
Deletes the public key for the specified user
Generates the host key
Clear the host key from RAM
Saves the host key from RAM to flash memory
Terminates a line connection
Displays the status of the SSH server and the configured
valuesfor authentication timeout and retries
Displays the status of current SSH sessions
Shows the public key for the specified user or for the host
Shows SSH users, including privilege level and public key type
Table 5-36 Secure Shell Commands
449
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Mode
GC
GC
GC
GC
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE