Planet SGSD-1022 User Manual page 162

The page includes the following fields:
Object
Path Cost Method
Transmission Limit
Configuration Settings for MSTP
The page includes the following fields:
Object
Max Instance Numbers
Configuration Digest
Region Revision
Region Name
Description
The path cost is used to determine the best path between devices. The path cost
method is used to determine the range of values that can be assigned to each
interface.
- Long: Specifies 32-bit based values that range from 1-200,000,000.
(This is the default.)
- Short: Specifies 16-bit based values that range from 1-65535.
The maximum transmission rate for BPDUs is specified by setting the minimum
interval between the transmission of consecutive protocol messages.
Range: 1-10;
Default: 3
Figure 4-7-5 MSTP Configuration page screenshot
Description
The maximum number of MSTP instances to which this Managed Switch can be
assigned.
An MD5 signature key that contains the VLAN ID to MST ID mapping table. In
other words, this key is a mapping of all VLANs to the CIST.
The revision for this MSTI.
Range: 0-65535;
Default: 0
The name for this MSTI.
162
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P