Banner Configure Company - Planet SGSD-1022 User Manual

banner configure company

This command is used to configure company information displayed in the banner. Use the no form to restore the default setting.
Syntax
banner configure company name
no banner configure company
name - The name of the company. (Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure company command interprets spaces as data input
boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where
whitespace is necessary for clarity.
Example
Console(config)#banner configure company ABC Co.
Console(config)#
banner configure dc-power-info
This command is use to configure DC power information displayed in the banner. Use the no form to restore the default setting.
Syntax
banner configure dc-power-info floor floor-id row row-id rack rack-id electrical-circuit ec-id no banner configure
dc-power-info [floor | row | rack | electrical-circuit]
floor-id - The floor number.
row-id - The row number.
rack-id - The rack number.
ec-id - The electrical circuit ID.
Default Setting
None
Command Mode
Global Configuration
Command Usage
Maximum string length for each command attribute is 32 characters.
User's Manual of SGSD-1022 / SGSD-1022P
358
SGSW-2840 / SGSW-2840P