Planet SGSD-1022 User Manual page 100

1. Click SNMP, Configuration.
2. Enter the IP address and community string for each management station that will receive trap messages, specify the UDP
port, trap version, trap security level (for v3 clients), trap inform settings (for v2c/v3 clients), and then click Add.
3. Select the trap types required using the check boxes for Authentication and Link-up/down traps, and then click Apply.
The page includes the following fields:
Object
Trap Manager Capability
Current
Trap Manager IP Address
Trap Manager Community
String
Trap UDP Port
Trap Version
Trap Security Level
Trap Inform
Enable Authentication
Description
This switch supports up to five trap managers.
Displays a list of the trap managers currently configured.
IP address of a new management station to receive notification message
(i.e., the targeted recipient).
Specifies a valid community string for the new trap manager entry. Though you
can set this string in the Trap Managers table, we recommend that you define
this string in the SNMP Configuration page (for Version 1 or 2c clients), or define
a corresponding "User Name" in the SNMPv3 Users page (for Version 3 clients).
(Range: 1-32 characters, case sensitive)
Specifies the UDP port number used by the trap manager.
(Default: 162)
Specifies whether to send notifications as SNMP v1, v2c, or v3 traps.
(Default: v1)
When trap version 3 is selected, you must specify one of the following security
levels.
noAuthNoPriv There is no authentication or encryption used in SNMP
communications.
SNMP communications use authentication, but the data is
AuthNoPriv
not encrypted (only available for the SNMPv3 security
model).
AuthPriv SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
(Default: noAuthNoPriv)
Notifications are sent as inform messages. Note that this option is only available
for version 2c and 3 hosts. (Default: traps are used)
Timeout The number of seconds to wait for an acknowledgment
The maximum number of times to resend an inform
Retry
before resending an inform message.
message if the recipient does not acknowledge.
times –receipt.
Range: 0-2147483647 cent seconds;
Range: 0-255;
Default: 1500 cent seconds
Default: 3
Issues a notification message to specified IP trap managers whenever an invalid
100
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P