Planet SGSD-1022 User Manual page 467

-Port-control
-Supplicant
-Intrusion action
Authenticator State Machine
- State
-Reauth Count
Backend State Machine
-State
-Request Count
- Identifier(Server)
Reauthentication State Machine
-State
Example
Console# show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 enabled
1/28 disabled
802.1X Port Details
802.1X is disabled on port 1/1
802.1X is enabled on port 1/2
- Shows the dot1x mode on a port as auto, force-authorized, or
force-unauthorized.
- MAC address of authorized client. -Current Identifier – The
integer (0-255) used by the Authenticator to identify the current
authentication session.
- Shows whether the switch will block all traffic or assign traffic
on the port to a guest VLAN if authentication fails.
- Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
- Number of times connecting state is re-entered.
- Current state (including request, response, success, fail,
timeout, idle, initialize).
- Number of EAP Request packets sent to the Supplicant without
receiving a response.
- Identifier carried in the most recent EAP Success, Failure or
Request packet received from the Authentication Server.
- Current state (including initialize, reauthenticate).
Operation Mode Mode
Single-Host ForceAuthorized
Single-Host auto
Single-Host ForceAuthorized
467
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Authorized
n/a
yes
n/a