Lldp Dot1-Tlv Proto-Vid - Planet SGSD-1022 User Manual

Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#

lldp dot1-tlv proto-vid

This command configures an LLDP-enabled port to advertise port related VLAN information. Use the no form to disable this
feature.
Syntax
[no] lldp dot1-tlv proto-vid
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the port-based and protocol-based VLANs configured on this interface (see "Configuring VLAN
Interfaces" on page 4-227 and "Configuring Protocol-based VLANs" on page 4-244).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#
lldp dot1-tlv pvid
This command configures an LLDP-enabled port to advertise its default VLAN ID. Use the no form to disable this feature.
Syntax
[no] lldp dot1-tlv pvid
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port's default VLAN identifier (PVID) indicates the VLAN with which untagged or priority-tagged frames are
associated (see switchport native vlan on page 4-230).
User's Manual of SGSD-1022 / SGSD-1022P
607
SGSW-2840 / SGSW-2840P