Radius Settings - Planet SGSD-1022 User Manual

4.11.3 RADIUS Settings

This page is to configure the RADIUS server connection session parameters. The RADIUS Settings screen in
appears.
The page includes the following fields:
Object
RADIUS Settings -Global
ServerIndex
Server IP Address
Server Port Number
Secret Text String
Number of Server
Transmits
Timeout for a reply
Figure 4-11-3 Authentication \ RADIUS Settings screenshot
Description
Provides globally applicable RADIUS settings.
Specifies one of five RADIUS servers that may be configured. The Managed
Switch attempts authentication using the listed sequence of servers. The process
ends when a server either approves or denies access to a user.
Address of the RADIUS server.
Network (UDP) port of authentication server used for authentication messages.
Range: 1-65535;
Default: 1812
Encryption key used to authenticate logon access for client.
Do not use blank spaces in the string.
(Maximum length: 48 characters)
Number of times the Managed Switch tries to authenticate logon access via the
authentication server.
Range: 1-30;
Default: 2
The number of seconds the Managed Switch waits for a reply from the RADIUS
server before it resends the request.
Range: 1-65535;
Default: 5
User's Manual of SGSD-1022 / SGSD-1022P
258
SGSW-2840 / SGSW-2840P
Figure 4-11-3