Lldp Poe Neighbours - Planet XGSW-28040HP User Manual

 Reboot Only
 Reboot Hour
 Reboot Min
Buttons
: click to add new rule.
: Click to apply changes
: Check to delete the entry.

4.16.8 LLDP PoE Neighbours

This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure
Please be noticed that administrator has to enable LLDP port from LLDP configuration, please refer to following example (The
screen in Figure 4-16-8 appears.) we enabled LLDP function from port1 ro port3, administrator has to plug a PD that supported
PoE LLDP function, and then administrator is going to see the PoE information of the PD form LLDP.
This function offers administrator to reboot PoE device at indicate time if
administrator has this kind of requirement.
Allows user to reboot PoE function by PoE reboot schedule. Please be noticed that if
administrator enable this function, PoE schedule will not to set time to profile. This
function just ony for PoE port reset on the indicate time.
Allows user to set what hour PoE reboots. This function only for PoE reboot
schedule.
Allows user to set what minute PoE reboots. This function only for PoE reboot
schedule.
Figure 4-16-7: LLDP PoE Neighbour Screenshot
Figure 4-16-8: LLDP Configuration Screenshot
325
User's Manual of XGSW-28040HP
4-16-7 appears.