Management Ip Filter Commands - Planet SGSD-1022 User Manual

reauth-enabled:
reauth-period:
quiet-period:
tx-period:
supplicant-timeout:
server-timeout:
reauth-max:
max-req:
Status
Operation mode
Max count
Port-control
Supplicant Current
Identifier
Intrusion action
Authenticator State Machine
State
Reauth Count
Backend State Machine
State
Request Count
Identifier(Server)
Reauthentication State Machine
State

5.12.10 Management IP Filter Commands

This section describes commands used to configure IP management access to the switch
Command
management
show management
management
This command specifies the client IP addresses that are allowed management access to the switch through various protocols.
Use the no form to restore the default setting.
Syntax
[no] management {all-client | http-client | snmp-client | telnet-client} start-address [end-address]
all-client -Adds IP address(es) to the SNMP, web and Telnet groups.
http-client -Adds IP address(es) to the web group.
Enable
1800
30
40
30
10
2
5
Authorized
Single-Host
5
Auto
00-30-4F-49-5e-dc
3
Guest VLAN
Authenticated
0
Idle
0
2
Initialize
Function
Configures IP addresses that are allowed management access
Displays the switch to be monitored or configured from a
browser
Table 5-39 IP Filter Commands
468
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Mode
GC
PE