Mvr Configuration - Planet SGSD-1022 User Manual

Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
4. For multicast streams that will run for a long term and be associated with a stable set of hosts, you can statically bind the
multicast group to the participating interfaces (see "Assigning Static Multicast Groups to Interfaces").

4.9.3.1 MVR Configuration

Configuring Global MVR Settings
The global settings for Multicast VLAN Registration (MVR) include enabling or disabling MVR for the Managed Switch, selecting
the VLAN that will serve as the sole channel for common multicast streams supported by the service provider, and assigning the
multicast group address for each of these services to the MVR VLAN.
The page includes the following fields:
Object
MVR Status
MVR Running Status
Figure 4-9-11 MVR Configuration page screenshot
Description
When MVR is enabled on the switch, any multicast data associated with an MVR
group is sent from all designated source ports, and to all receiver ports that have
registered to receive data from that multicast group.
(Default: Disabled)
Indicates whether or not all necessary conditions in the MVR environment are
219
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P