Table of Contents
Advertisement
Example 2: Downloading System Software from a Server
When downloading runtime code, you can specify the destination file name to replace the current image, or first download the
file using a different name from the current runtime code file, and then set the new file as the startup file.
1.
Click System, File Management, Copy Operation.
2.
Select "tftp to file" as the file transfer method, enter the IP address of the TFTP server.
3.
Set the file type to "opcode," enter the file name of the software to download, select a file on the Managed Switch to
overwrite or specify a new file name and click Apply.
4.
If you replaced the current firmware used for startup and want to start using the new operation code, reboot the system via
the System/Reset menu.
Figure 4-2-9 Download system software screenshot
Figure 4-2-10 TFTP Server system software transmit screenshot
User's Manual of SGSD-1022 / SGSD-1022P
63
SGSW-2840 / SGSW-2840P
Hide quick links:
Advertisement
Table of Contents
