Planet SGSD-1022 User Manual page 662

Console# show mvr
MVR Status:enable
MVR running status:TRUE
MVR multicast vlan:1
MVR Max Multicast Groups:255
MVR Current multicast groups:10
Console#
Field
MVR Status
MVR running status
MVR multicast vlan
MVR Max Multicast Groups
MVR Current multicast groups
The following displays information about the interfaces attached to the MVR VLAN:
Console# show mvr interface
Port Type
--------- ----------
eth1/1 SOURCE
eth1/2 RECEIVER
eth1/5 RECEIVER
eth1/6 RECEIVER
eth1/7 RECEIVER
Console#
Field
Port
Type
Status
Description
Shows if MVR is globally enabled on the switch.
Indicates whether or not all necessary conditions in the MVR
environment are satisfied.
Shows the VLAN used to transport all MVR multicast traffic.
Shows the maximum number of multicast groups which can
assigned to the MVR VLAN.
Shows the number of multicast groups currently assigned to the
MVR VLAN.
Table 5-90 show mvr - display description
Status Immediate Leave
-------------------- -----------------------
ACTIVE/UP Disable
ACTIVE/UP Disable
INACTIVE/DOWN Disable
INACTIVE/DOWN Disable
INACTIVE/DOWN Disable
Description
Shows interfaces attached to the MVR.
Shows the MVR port type.
Shows the MVR status and interface status. MVR status for
source ports is"ACTIVE" if MVR is globally enabled on the
switch. MVR status for receiverports is "ACTIVE" only if there
are subscribers receiving multicast traffic from one of the MVR
groups, or a multicast group has been statically assigned to an
User's Manual of SGSD-1022 / SGSD-1022P
662
SGSW-2840 / SGSW-2840P