Logging Sendmail Destination-Email - Planet SGSD-1022 User Manual

Command Mode
Global Configuration
Command Usage
You may use an symbolic email address that identifies the switch, or the address of an administrator responsible for the
switch.
Example
This example will set the source email marcl@planet.com.tw.
Console(config)#logging sendmail source-email marcl@planet.com.tw
Console(config)#

logging sendmail destination-email

This command specifies the email recipients of alert messages. Use the no form to remove a recipient.
Syntax
no] logging sendmail destination-email email-address
email-address -The source email address used in alert messages.
(Range: 1-41 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
You can specify up to five recipients for alert messages. However, you must
enter a separate command to specify each recipient.
Example
Console(config)#logging sendmail destination-email ted@this-company.com
Console(config)#
logging sendmail
This command enables SMTP event handling. Use the no form to disable this function.
Syntax
[no] logging sendmail
Default Setting
Enabled
Command Mode
User's Manual of SGSD-1022 / SGSD-1022P
397
SGSW-2840 / SGSW-2840P