Power Over Ethernet (Sgsd-1022P / Sgsw-2840P) - Planet SGSD-1022 User Manual

4.13 Power Over Ethernet (SGSD-1022P / SGSW-2840P)

Providing up to 8/24 PoE, in-line power interface, the SGSD-1022P / SGSW-2840P PoE Switch can easily build a power
central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 8 camera / AP can be easily
installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the PoE Switch makes the installation of cameras or WLAN AP more easily and efficiently.
4.13.1 Power over Ethernet Powered Device
3~5 watts
6~12 watts
10~12 watts
3~12 watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interrupt power system
and power control system.
Wireless LAN Access Points
Museum, Sightseeing, Airport, Hotel, Campus, Factory, Warehouse can
install the Access Point any where with no hesitation
IP Surveillance
Enterprise, Museum, Campus, Hospital, Bank, can install IP Camera without
limits of install location – no need electrician to install AC sockets.
PoE Splitter
PoE Splitter split the PoE 48V DC over the Ethernet cable into 5/9/12V DC
power output. It frees the device deployment from restrictions due to power
outlet locations, which eliminate the costs for additional AC wiring and reduces
the installation time.
335
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P