Commands Level - Planet VC-820M User Manual

5.3 Commands Level

The following table lists the CLI commands and description.
Modes
Begin a session
User EXEC
with your switch.
Enter the enable
Privileged
command while in
EXEC
User EXEC mode.
Enter the configure
command while in
Global
privileged EXEC
Configuration
mode.
Access Method Prompt
switch>
switch#
switch (config)#
Exit Method
Enter logout or
quit.
Enter disable to
exit.
To exit to
privileged EXEC
mode, enter exit
or end
155
User's Manual of VC-820M
About This Mode1
The user commands available
at the user level are a subset of
those available at the
privileged level.
Use this mode to:
• Perform basic tests.
• Display system information.
The privileged command is the
advanced mode.
Use this mode to
• Display advanced function
status
• Save configuration
Use this mode to configure
those parameters that are
going to be applied to your
switch.