Required Toolset - Felix printers Felix 2.0 Instruction Manual

3

REQUIRED TOOLSET

The following tools are minimally required to assemble and use the Felix printer
Wrenches 7 and 13mm
Tweezers. (included in kit)
Nippers.
Caliper
Allen Key set. IMPORTANT: they
need to be preferably long and
have a round head at the end.
Pliers
Drill with a variable speed. When
plastic parts need to be drilled out,
it should be done with care
Level
Drill bits 4, 5mm
Hammer
Wire stripper, recommended
Detergent (Spirit, Acetone, Alcohol)
support@FELIXprinters.com
Assembly instruction manual FELIX 2.0 3d printer
www.FELIXprinters.com

Page 4 of 51