Module 7: Electronics (Time: 2-4 Hrs.) - Felix printers Felix 2.0 Instruction Manual

12

MODULE 7: ELECTRONICS (TIME: 2-4 HRS.)

The goal of this module is to install all electric wires and to neatly put them away in the frame.
The required tools for this module are:
- Nippers
- Screwdriver, flat and philipshead
IMPORTANT: Make sure you are grounded and make sure you cannot create static
electricity.
Static electricity can kill the electronics board. To prevent it do the following:
- make sure you have no shoes or other isolating footwear on.
- Prevent touching any components on the board.
- When grabbing the electronics board grab it from the side
- Prevent very dry environment
- Do not wear any fleece or synthetic clothing.
support@FELIXprinters.com
Assembly instruction manual FELIX 2.0 3d printer
www.FELIXprinters.com

Page 33 of 51