Felix printers Felix 2.0 Instruction Manual page 15

Assembly instruction manual FELIX 2.0 3d printer
CAREFULLY Screw in the z-axis spindle from the top until it reaches
the motor and place the z-axis assembly in the middle. Make sure the
brass nut is inside the z-axis carrier assembly.
NOTE: It is important not to force the spindle in because when it is
not straight anymore it will affect print-quality.
Congratulations, you've finished the z-axis module.
support@FELIXprinters.com www.FELIXprinters.com Page 15 of 51
