Module 6: Y-Axis (Time: 10-30 Min.) - Felix printers Felix 2.0 Instruction Manual

11

MODULE 6: Y-AXIS (TIME: 10-30 MIN.)

Required tools for this module
- Allen key set.
- wrench
BOM y-axis
Part description
y-stage bracket pt1_v6_F1_5
y-stage bracket pt2_v6_F1_5
y-stage bracket pt4_v4
20x10_aluminum profile + protective cap
t_slot_nut_5
Hiwin lineair ball bearing set
t_slot_nut_5_M3
t_slot_nut_8_M3
ISO 10642 - M3 x 6 --- 5N - CSK
Hexagon socket head cap screw DIN 912 - M3 x 8
Hexagon socket head cap screw DIN 912 - M3 x 12
Hexagon socket head cap screw DIN 912 - M3 x 16
Prevailing torque type hexagon nut ISO 7040 - M3
Washer ISO 7089 - M3
IMPORTANT: DO NOT let the cart
of the linear bearing go off the rail.
There are small balls in there which
might fall out when the cart rolls of
the rail.
support@FELIXprinters.com
Assembly instruction manual FELIX 2.0 3d printer
Amount
1
1
1
1
1
1
2
3
5
2
4
10
6
6
www.FELIXprinters.com

Mount both brackets onto rail with m4x16 bolts and the m3 self
locking nuts. Don't forget to place the washers
Page 28 of 51