Felix printers Felix 2.0 Instruction Manual page 20

Assembly instruction manual FELIX 2.0 3d printer
Mount the fan and airduct with m4x20 bolts onto the extruder base.
Use m4 selflocking nuts and also use washers.The bolts don't have to go
all the way through the self locking part of the nut.
NOTE: watch the orientation of the wires and also make sure the sticker
of the fan is facing downwards.
Slide the motor-subassembly onto the base.
support@FELIXprinters.com www.FELIXprinters.com Page 20 of 51
