Mount The Powersupply - Felix printers Felix 2.0 Instruction Manual

12.1 MOUNT THE POWERSUPPLY.

BOM Electronics
Part description
Electonics_case_F_2_0_v3_base
Electonics_case_F_2_0_v4_cap
Felixprinters electronics
mini-ATX-seasonic
Power Cable EU,USA,Australian or British
Pre-crimped cables 3 threads
USB cable 1.8m
Get the parts described in the table above.
support@FELIXprinters.com
Assembly instruction manual FELIX 2.0 3d printer
Amount
1
1
1
1
1
3
1
www.FELIXprinters.com

Mount the electonics case base part onto powersupply with the
powersupply screws (short thick philips head screws). Slide the part on
the powersupply from the top.
Page 35 of 51