Felix printers Felix 2.0 Instruction Manual page 34

Assembly instruction manual FELIX 2.0 3d printer
To make the printer work properly the schematics below must be matched. This chapter will guide you step by step to match the schematics above.
NOTE: It is important that the cables are placed as neatly as possible. Placing the wires in a messy way, can lead to EMC problems. The
electronics can become sensitive to outside influences and lead to unreliable printing. For instance when a lamp is switched on or off the
electronics could stop working until you reset it again.
support@FELIXprinters.com www.FELIXprinters.com Page 34 of 51
