Inserting The Control Module - OKIDATA OKIMATE 10 Handbook

Inserting the Control Module
Follow the directions on the next seven pages
and run the "Learn to Print" demonstration
program. In about 15 minutes you can be
printing in black or in color. At this point you
only need the paper and the equipment sup¬
plied with your Atari Plug 'N Print kit. (More
detailed information on operating your OKI-
MATE is provided in Chapter 2, "A Player's
Guide" which begins on page 15.)
Don't plug your printer in just yet — we'll tell
you when you can.
Insert the Plug 'N Print control module:
Slide the module into the slot until it is
firmly in place.
Push the module with your thumb until it
sits in firmly.
Insert the module locking cover as shown.
IMPORTANT: Always turn OKIMATE off before inserting or
removing the control module. Directions for removing the con¬
trol module are found on page 44.
3