Paper Specifications - OKIDATA Pacemark 3410 Service Manual

Page: 9
Service Guide PM3410
Chapter 1 Product Specifications

1.7 PAPER SPECIFICATIONS

1.7.01 Types
Card Stock
Weight: 120 lbs. (450 g/m 2 ) Maximum
Width: 5 to 14 inches (12.7 to 35.6 centimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: .02 inches (0.5 millimeters)
Paper Feed Path: Bottom
Head Gap Lever Setting: 8 - 9
Continuous Form
Weight:
Single Part 12 - 24 lb. (45 to 90 g/m 2 )
Multi-Part, Carbonless 9 - 11 lb. (35 to 40 g/m 2 )
Multi-Part, Interleaf Paper 10 - 12 lb. (38 to 45 g/m 2 ) Carbon 9 lb. (35 g/m 2 )
Width: 3 to 16 inches (76.2 to 406.4 millimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: 0.014 inches (0.36 millimeters) Rear Feed 0.02 inches (0.5 millimeters) Bottom Feed
Paper Feed Path: Rear or Bottom
Head Gap Lever Setting: 1 Single Part 12 - 15 lb. (45 to 56 g/m 2 )
1 - 2 Single Part 20 - 24 lb. (75 to 90 g/m 2 )
2 - 3 Two Part
3 - 4 Three Part
5 Four Part
6 Five Part
7 Six Part
Cut Sheet
Weight: 12 to 24 lbs. (45 to 90 g/m 2 )
Width: 7.2 to 14.3 inches (18.3 to 36.3 centimeters)
Length: 3 to 17 inches (7.62 to 43.18 centimeters)
Thickness: 0.014 inches (0.325 millimeters) Maximum
Paper Feed Path: Top
Head Gap Lever Setting: 1 12 - 15 lb. (45 to 56 g/m 2 )