Paper Specifications - OKIDATA ML320 Service Manual

1.3

PAPER SPECIFICATIONS

1.3.01 Width
Microline 320
Minimum: 3 inches (76.2 mm)
Maximum: 10 inches (254 mm)
Microline 321
Minimum: 3 inches (76.2 mm)
Maximum: 16 inches (406.4 mm)
1.3.02 Single Part Forms
Weight
Minimum: 12 pound (45 g/m2)
Maximum: 24 pound (90 g/m2)
Thickness
Maximum: 0.014 inches (0.356 mm)
1.3.03 Multipart Forms - Carbon Lined or Pressure Sensitive
Weight
Minimum: 9 pound (35 g/m2)
Maximum: 11 pound (40 g/m2)
Thickness
Maximum: 0.014 inches (0.356 mm)
Number of Copies
Original plus four copies
1.3.04 Multipart - Interleaf
Weight
Paper
Carbon
Thickness
Number of Copies
1.3.05 Cut Sheets (Single Part ONLY)
Friction Feed
Weight
Thickness
Weight
Minimum: 10 pound (38 g/m2)
Maximum: 12 pound (45 g/m2)
Maximum: 9 pound (35 g/m2)
Maximum: 0.014 inches (0.356 mm)
Original plus four copies
Minimum: 12 pound (45 g/m2)
Maximum: 24 pound (90 g/m2)
Maximum: 0.014 inches (0.356 mm)
Cut Sheet Feeder 3000
Minimum: 12 pound (45 g/m2)
Service Guide ML320/ML321
Chapter 1 Product Specifications
Page: 8