Ribbon Protector Assembly - OKIDATA Pacemark 3410 Service Manual

Page: 36
Service Guide PM3410
Chapter 3 Maintenance & Disassembly

3.2.02 Ribbon Protector Assembly

1. Open the printer access cover.
2. Remove the ribbon cartridge.
3. Set the head gap adjusting lever to the range 9 position.
4. Lift and remove the ribbon guide from the two posts.
5. Remove the two mounting screws (1) and detach the ribbon protector (2) by lifting.
P/N 50316701 Screw: Ribbon Protector (Post) RSPL B.2.05
P/N 53062701 Protector: Ribbon Assembly RSPL B.2.05