Windows Nt 4.0 Configuration; Configuring Windows Nt 4.0; Printing Without A Print Server; Printing With A Lpr Port - Ricoh C2408 Operating Instructions Manual

4. Windows NT 4.0 Configuration

Configuring Windows NT 4.0

Note
❒ Windows NT 4.0 does not support IP over 1394.

Printing without a Print Server

The following procedure describes how to configure Windows NT 4.0 to use the
machine on a network without a Windows 2000 Server, Windows 2000 Profes-
sional, Windows XP Server, Windows NT Server, Windows NT Workstation or
NetWare based print server.
A A A A
Specify the protocol to use.
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
B B B B
Configure the chosen protocol.
• See p.48 "Configuring TCP/IP and IPP for Printing".
• See p.49 "Configuring NetBEUI for Printing".
C C C C
Install the software and set the printer driver port.
• Install SmartNetMonitor for Client from the CD-ROM labeled "Printer
Drivers and Utilities". For more information about how to install the soft-
ware and how to specify the printer driver port, see the Printer Reference 1.

Printing with a LPR Port

See p.56 "Configuring LPR Port Printing" for how to configure a LPR port in
Windows NT 4.0.

Printing with a Windows 2000/XP or Windows NT Print Server

See p.57 "Setting Up a Client Computer" for configuring Windows NT 4.0 with
a Windows 2000/XP or Windows NT print server.
47