Set Exception Day Mode - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
Related Programming
• N/A
Considerations
• N/A

Set Exception Day Mode

Description
(For a description of Automatic Day/Night System Mode, see "Automatic Day/Night Mode" on page
3-26.)
You can specify exception days which allow for a range of days for the System to operate in the Night
mode. This is intended for extended holidays for business shut down periods that last for multiple
days. You can specify up to 6 exception day periods.
Operation
To set the Exception Day Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 2.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the start date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the stop date by month (two characters) and day (two
characters) for Exception Period 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
576-50-700
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
81-
User MAINT displays
8107-
System Mode displays
2-
Mode Except Day displays
200 :MMDD
PTN 1 Start Day displays
201 :MMDD
PTN 1 Stop Day displays
Next Exception Day mode displays
4-11