Chapter 7. SLT Features
Trunk Group Pickup
Trunk Group Pickup allows you to answer calls ringing to any extension within your own MCO
incoming trunk group.
Operation
To use Trunk Group Pickup:
1. Lift the handset.
2. Enter the Trunk Group Pickup code (default = 709).
3. Complete the call and replace the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
•
FF5-3: MCO Inbound Trunk Group Members
Considerations
•
N/A
Trunk Direct Pickup
Trunk Direct Pickup allows you to answer calls ringing on a specific trunk number.
Operation
To use Trunk Direct Pickup:
1. Lift the handset.
2. Enter the Trunk Direct Pickup code (default = *0).
3. Dial the number of the ringing or holding (system) trunk.
4. Complete the call and replace the handset.
Hardware Requirements
•
N/A
Related Programming
•
FF1-2: Dial Plan
7-20
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
576-50-700