Panasonic DBS 576 HD Technical Manual page 293

Section 700 - Operation
To retrieve a call parked at the originating extension from another extension:
1. Lift the handset
2. Enter the Station Call Park Answer/Other Ext. code (default
= 773).
OR...
Enter the Station Call Park/Floating Hold Answer code
(default = *9).
3. Dial the number of the extension that parked the call.
To park a call at another extension:
1. While on a call, press the hookswitch.
2. Enter the Station Call Park Transfer code (default = 774).
3. Dial the extension number to receive the parked call.
4. If necessary, page the party that needs to retrieve the call.
To retrieve a transferred call park:
1. At the extension with the transferred park call, lift the hand-
set.
2. Enter the Station Call Park Answer/Own code (default =
772).
Hardware Requirements
• N/A
Related Programming
• FF1 (System): Extension Park Hold Recall Timer
• FF1-0-02: Dial Control for Floating Hold Answer
Considerations
• You cannot park more than one call at a time.
• If two calls are on hold and the last call is parked, the other call is then considered the last held
call. If a transfer is performed, the remaining held call would be the call transferred, not the
parked call.
576-50-700
Action
Action
Action
DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
Result
Intercom dial tone
• Connected to parked call
Result
• Intercom dial tone
Result
Intercom dial tone
• Connected to parked call
7-17