Message Waiting/Callback - Panasonic DBS 576 HD Technical Manual

Chapter 7. SLT Features
Operation
To automatically redial the last number dialed:
1. Lift the handset or press the ON/OFF key.
OR...
Enter a trunk access code.
2. Press the REDIAL key.
3. Complete the call and replace the handset or press the ON/
OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Redialing)
• FF3: Extension COS
Considerations
• Extension Class of Service (COS) determines whether Last Number Redial can be used for both
intercom and CO calls, or CO calls only.

Message Waiting/Callback

Description
If you try to call an extension that is busy or does not answer, you can leave a message wait indication
at that extension, requesting a return call.
Operation
To leave a message waiting indication:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. While the telephone is still ringing, or when you hear the
busy tone, enter the Message Wait Set code (default = 4).
4. Replace the handset or press the ON/OFF key.
6-34
Action
Action
DBS 576HD (USA) issued September 2001
Section 700 - Operation
Result
Outside dial tone (if trunk access code
entered)
Result
Intercom dial tone
Ring or busy tone
Message lamp flashes at called extension
576-50-700