Disconnect Signal; High Priority Message Waiting; Message Key Id Code - Panasonic DBS 576 HD Technical Manual

Section 700 - Operation
Related Programming
• FF1-4-06: DID Number Automatic Send to VM
• FF1-4-06: VM ID Code Prefix
• FF1-4-06: VM ID Code: Suffix
Considerations
• Each pause is a fixed 1 second delay.
• If you do not assign a Voice Mail ID Code, the DID digits will be sent to voice mail.
• Only one Voice Mail ID Code is available for the system.

Disconnect Signal

Beginning with CPC Version 2.0, either busy tone or silence can be sent to a third-party voice mail
system when the caller hangs up.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• For more information on setting and retrieving message waiting, see the telephone operation
sections that follow in this document.

High Priority Message Waiting

Message waiting displays and LEDs may be utilized by the Voice Mail system to indicate that a Voice
Mail message has been left in your mail box. When you retrieve the message, the message waiting
indications are cleared.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• For more information on setting and retrieving message waiting, see the telephone operation
sections that follow in this document.

Message Key ID Code

On a large-display phone you can use a Message key (labeled MSG) to either retrieve Voice Mail
messages or respond to telephone messages. When responding to Voice Mail messages from a 3rd
party Voice Mail system, the Message key needs to have an ID code set to identify the caller to the
Voice Mail system. You can also use the Message key to program a Voice Mail password.
You must program the Message key using the User Maintenance feature "Set Message Key ID Code"
on page 4-14.
576-50-700 DBS 576HD (USA) issued September 2001
Chapter 7. SLT Features
3-61